Leica Usb Cable Driver For Windows 7 573

Leica Usb Cable Driver For Windows 7 573

Download File - https://bltlly.com/2txVEu

How to Download and Install Leica USB Cable Driver for Windows 7

If you have a Leica instrument that uses a USB cable for data transfer, such as a total station or a controller, you may need to install a driver on your Windows 7 computer to recognize the device. A driver is a software that allows your computer to communicate with the hardware. Without a driver, your computer may not be able to detect or access the device properly.

In this article, we will show you how to download and install the Leica USB cable driver for Windows 7 in a few simple steps.

Step 1: Download the driver

The first step is to download the driver from the Leica Geosystems website. You can find the driver on the Data Transfer Cables page under the Accessories section. Alternatively, you can use this direct link[^1^] to download the driver.

The driver file is a ZIP archive that contains a CD image file (.iso) and a readme file (.txt). The CD image file contains the driver installation program and the readme file contains some instructions and information about the driver.

Step 2: Extract the driver file

The next step is to extract the driver file from the ZIP archive. You can use any program that can open ZIP files, such as WinZip, WinRAR, or 7-Zip. To extract the driver file, right-click on the ZIP archive and select \"Extract All\" or \"Extract Here\" depending on your program. Choose a location where you want to save the extracted files and click \"OK\".

After extracting the files, you should see a folder named \"GEV189_Win7_64bit\" or \"GEV189_Win7_32bit\" depending on your system type. Inside this folder, you should see two files: \"GEV189_Win7.iso\" and \"Readme.txt\".

Step 3: Mount or burn the CD image file

The third step is to mount or burn the CD image file to a virtual or physical CD drive. A CD image file is a file that contains all the data of a CD as if it were inserted into a CD drive. To use this file, you need to either mount it to a virtual CD drive using a program like Daemon Tools or Virtual CloneDrive, or burn it to a blank CD using a program like Nero or ImgBurn.

To mount the CD image file, launch your virtual CD drive program and select \"Mount Image\" or \"Open Image\" depending on your program. Browse to the location where you extracted the files and select \"GEV189_Win7.iso\". This will create a virtual CD drive on your computer that contains the driver installation program.

To burn the CD image file, launch your CD burning program and select \"Burn Image\" or \"Write Image\" depending on your program. Browse to the location where you extracted the files and select \"GEV189_Win7.iso\". Insert a blank CD into your physical CD drive and click \"Burn\" or \"Write\". This will create a physical CD that contains the driver installation program.

Step 4: Run the driver installation program

The final step is to run the driver installation program from the virtual or physical CD drive. To do this, open \"My Computer\" or \"Computer\" on your desktop or start menu and double-click on the CD drive icon. You should see a window with an autorun menu that has two options: \"Install USB Driver\" and \"Browse Files\". Select \"Install USB Driver\" and follow the instructions on the screen.

The driver installation program will ask you to connect your Leica instrument to your computer using the USB cable. Make sure your instrument is turned on and connected properly before proceeding. The program will then detect your device and install the driver automatically. You may need to restart your computer after the installation is complete.

Conclusion

Congratulations! You have successfully downloaded and installed the Leica USB cable driver for Windows 7. You can now transfer data between your Leica instrument and your 061ffe29dd